iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 22163:2024

(Main)

Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)

Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)

This document specifies requirements for a quality management system when an organization:
a)    needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b)    aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this document are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1    In this document, the terms “product” or “service” only apply to products and services intended for, or required by, a customer.
NOTE 2    Statutory and regulatory requirements can be expressed as legal requirements.
This document specifies the requirements for a railway quality management system (RQMS)
—    applicable throughout the whole supply chain of the railway sector related to industrial products and services,
—    providing continual improvement, emphasizing defect prevention and defect reduction in the supply chain, and
—    enhancing and sustaining product quality, including its safety aspects.

Bahnanwendungen - Eisenbahn-Qualitätsmanagementsystem - ISO 9001:2015 und spezifische Anforderungen für die Anwendung im Bahnsektor (ISO 22163:2023)

Applications ferroviaires - Système de management de la qualité ferroviaire - Exigences de l'ISO 9001:2015 et exigences particulières concernant les applications dans le secteur ferroviaire (ISO 22163:2023)

Le présent document spécifie les exigences relatives au système de management de la qualité lorsqu'un organisme:
a)    doit démontrer son aptitude à fournir constamment des produits et des services conformes aux exigences des clients et aux exigences légales et réglementaires applicables, et
b)    vise à accroître la satisfaction de ses clients par l'application efficace du système, y compris les processus pour l'amélioration du système et l'assurance de la conformité aux exigences des clients et aux exigences légales et réglementaires applicables.
Toutes les exigences de ce présent document sont génériques et prévues pour s'appliquer à tout organisme, quels que soient son type ou sa taille, ou les produits et services qu'il fournit.
NOTE 1    Dans ce présent document, les termes «produit» ou «service» s'appliquent uniquement aux produits et services destinés à, ou exigés par, un client.
NOTE 2    L'expression «legal requirement» recouvre en anglais le concept, utilisé dans ce présent document, d'exigence légale et réglementaire.
Le présent document spécifie les exigences d'un système de management de la qualité ferroviaire (SMQF):
—    applicables tout au long de la chaîne logistique du secteur ferroviaire et relatives aux produits et services industriels,
—    assurant l'amélioration continue et renforçant la prévention et la réduction des défaillances dans la chaîne d’approvisionnement, et
—    améliorant durablement la qualité des produits, y compris en matière de sécurité.

Železniške naprave - Sistem vodenja kakovosti v železniškem prometu - ISO 9001:2015 in posebne zahteve za uporabo v železniškem sektorju (ISO 22163:2023)

General Information

Status
Published
Publication Date
07-May-2024
ICS
03.100.70 - Management systems
45.020 - Railway engineering in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 57 - Adoption of ISO Standards
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-May-2024
Due Date
27-Feb-2026
Completion Date
08-May-2024
Ref Project
SIST EN ISO 22163:2024 - Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)

Buy Standard

EN ISO 22163:2024EN ISO 22163:2024
PreviousNext
Standard
EN ISO 22163:2024
English language
91 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
prEN ISO 22163:2024prEN ISO 22163:2024
PreviousNext
Draft
prEN ISO 22163:2024
English language
88 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22163:2024
01-julij-2024
Železniške naprave - Sistem vodenja kakovosti v železniškem prometu - ISO
9001:2015 in posebne zahteve za uporabo v železniškem sektorju (ISO 22163:2023)
Railway applications - Railway quality management system - ISO 9001:2015 and specific
requirements for application in the railway sector (ISO 22163:2023)
Bahnanwendungen - Eisenbahn-Qualitätsmanagementsystem - ISO 9001:2015 und
spezifische Anforderungen für die Anwendung im Bahnsektor (ISO 22163:2023)
Applications ferroviaires - Système de management de la qualité ferroviaire - Exigences
de l'ISO 9001:2015 et exigences particulières concernant les applications dans le
secteur ferroviaire (ISO 22163:2023)
Ta slovenski standard je istoveten z: EN ISO 22163:2024
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
45.020 Železniška tehnika na Railway engineering in
splošno general
SIST EN ISO 22163:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22163:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 22163:2024


EN ISO 22163
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2024
EUROPÄISCHE NORM
ICS 03.100.70; 45.020
English Version

Railway applications - Railway quality management
system - ISO 9001:2015 and specific requirements for
application in the railway sector (ISO 22163:2023)
Applications ferroviaires - Système de management de Bahnanwendungen - Eisenbahn-
la qualité ferroviaire - Exigences de l'ISO 9001:2015 et Qualitätsmanagementsystem - ISO 9001:2015 und
exigences particulières concernant les applications spezifische Anforderungen für die Anwendung im
dans le secteur ferroviaire (ISO 22163:2023) Bahnsektor (ISO 22163:2023)
This European Standard was approved by CEN on 5 May 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22163:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22163:2024
EN ISO 22163:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22163:2024
EN ISO 22163:2024 (E)
European foreword
The text of ISO 22163:2023 has been prepared by Technical Committee ISO/TC 269 "Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22163:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic,
...

SLOVENSKI STANDARD
oSIST prEN ISO 22163:2024
01-marec-2024
Železniške naprave - Sistem vodenja kakovosti v železniškem prometu - ISO
9001:2015 in posebne zahteve za uporabo v železniškem sektorju (ISO 22163:2023)
Railway applications - Railway quality management system - ISO 9001:2015 and specific
requirements for application in the railway sector (ISO 22163:2023)
Bahnanwendungen - Eisenbahn-Qualitätsmanagementsystem - ISO 9001:2015 und
spezifische Anforderungen für die Anwendung im Bahnsektor (ISO 22163:2023)
Applications ferroviaires - Système de management de la qualité ferroviaire - Exigences
de l'ISO 9001:2015 et exigences particulières concernant les applications dans le
secteur ferroviaire (ISO 22163:2023)
Ta slovenski standard je istoveten z: prEN ISO 22163
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN ISO 22163:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22163:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22163:2024
INTERNATIONAL ISO
STANDARD 22163
First edition
2023-07
Railway applications — Railway
quality management system — ISO
9001:2015 and specific requirements
for application in the railway sector
Applications ferroviaires — Système de management de la qualité
ferroviaire — Exigences de l'ISO 9001:2015 et exigences particulières
concernant les applications dans le secteur ferroviaire
Reference number
ISO 22163:2023(E)
© ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22163:2024
ISO 22163:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22163:2024
ISO 22163:2023(E)
Contents Page
Foreword . vi
Introduction .viii
1 Scope . 1
1.1 Scope — Supplemental . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 2
3.1.1 System . 2
3.1.2 Process . 3
3.1.3 Requirement . 7
3.1.4 Product and tools . 9
3.2 Abbreviated terms .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6185-3:2024(Main)
Inflatable boats - Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater (ISO 6185-3:2024)
kSIST FprEN ISO 6185-3:2024

This document specifies the minimum safety characteristics required for the design, materials, manufacture and testing of inflatable boats and rigid inflatable boats with a length of the hull LH in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
This document is applicable to the following types of boats intended for use within the operating temperatures of –20 °C to +60 °C:
—     Type VII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design categories C and D.
—     Type VIII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design category B.
This document excludes single-chambered boats and boats with tubes made from unsupported materials, and does not apply to aquatic toys and inflatable liferafts.
Boats with tubes made from aluminium, roto-moulded polyethylene, fibre reinforced plastic or other rigid materials are excluded from this document.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13322-1:2024(Main)
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel
kSIST FprEN 13322-1:2024

This document specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded carbon steel gas cylinders of water capacities up to and including 150 l for compressed, liquefied and dissolved gases.
For acetylene service, additional requirements for the cylinder and basic requirements for the porous material are given in EN ISO 3807. For cylinder shells for acetylene service manufactured from high frequency induction (HFI) welded steel tubes by spinning of the end, the requirements are given in Annex A.
This document is primarily applicable to industrial gases other than LPG but can also be applied for LPG. However for dedicated LPG cylinders, see EN 1442.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18040:2024(Main)
Stationary source emissions - Determination of the mass concentration of formaldehyde - Automatic method
kSIST-TS FprCEN/TS 18040:2024

This document specifies a measurement method based on an automatic method for determination of the mass concentration of formaldehyde in ducts and stacks emitting to the atmosphere. It specifies the sampling and gas conditioning system. Furthermore, it specifies the characteristics to be determined and the performance criteria to be fulfilled by portable automated measuring systems (P-AMS) using appropriate techniques to measure formaldehyde.
This method is intended for intermittent monitoring of formaldehyde emissions as well as for the calibration and validation of automated formaldehyde measuring systems.
The analyser is calibrated using test gases produced by a test gas generator.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12309-3:2024(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods
kSIST FprEN 12309-3:2024

1.1   Scope of EN 12309 series
Appliances covered by this document include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump;
-   hybrids based on gas sorption appliances.
This document applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This document applies to appliances having flue gas systems of Type B and Type C (according to EN 1749:2020) and to appliances designed for outdoor installations, including Type A.
EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems;
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated;
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2023).
In the case of packaged units (consisting of several parts), this document applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text are to be used regardless of the language used.
1.2   Scope of this Part 3 of EN 12309
This part of EN 12309 specifies the requirements, test methods and conditions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.
This part of EN 12309 deals particularly with test protocols and tools to calculate the capacity, the gas utilization efficiency and the electrical power input of the appliance. This data can be used in particular to calculate the seasonal efficiency of the appliance.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14620-1:2024(Main)
Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196 °C - Part 1: General
kSIST FprEN 14620-1:2024

This document is a specification for vertical, cylindrical tank systems, built on site, above ground and of which either the primary liquid container or the liquid tight barrier is made of steel. The secondary liquid container, if applicable, can be of steel or of concrete or a combination of both. A primary liquid container made of pre-stressed concrete is excluded from the scope of this document.
This document provides general requirements and specifies principles and application rules for the structural design of the tank system during construction, testing, commissioning, operation (accidental included), and decommissioning. This document applies to all tank system components attached to and located within the liquid, vapour, purge gas, membrane or membrane tank outer containers of the tank system. It does not address the requirements for ancillary equipment such as pumps, pumpwells, valves, instrumentation, external staircases and walkways, roof mounted platforms, external pipe supports, etc. The requirements for those components are covered by the relevant European Standards, structurally designed in accordance with Eurocodes where appropriate, and meeting applicable safety regulations.
This document also does not address tank system operating procedures unless specified for determination of the relevant resistance and protection criteria for the tank systems. It specifies minimum performance requirements for the tank system, tank system foundation and protection systems. From a process piping standpoint, the scope of this document is limited to the following boundaries:
a)   the face of the first flange outside of the tank in bolted flanged connection;
b)   the first threaded joint outside of the tank in threaded connection;
c)   the first circumferential pipe welded joint outside of the tank in welding-end pipe connection, which does not have a flange.
This document is applicable to storage tank systems designed to store products, having an atmospheric boiling point below ambient temperature, in a dual phase, i.e. liquid and vapour. The equilibrium between liquid and vapour phases being maintained by cooling down the product to a temperature equal to, or just below, its atmospheric boiling point in combination with a slight overpressure in the storage tank system.
The maximum design pressure of the tank systems covered by this document is limited to 500 mbar. For higher pressures, reference can be made to EN 13445, Parts 1 to 5.
The operating range of the gases to be stored is between 0 °C and −196°C.
The tank systems covered by this document are used to store large volumes of hydrocarbon products, ammonia and other non-hydrocarbon gases with low temperature boiling points, generally called “Refrigerated Liquefied Gases” (RLGs). Typical products stored in the tank systems are: methane, ethane, propane, butane, ethylene, propylene, butadiene (this range includes the Liquefied Natural Gas (LNG’s) and Liquefied Petroleum Gas (LPG’s)), ammonia, nitrogen, oxygen and argon.
NOTE 1   Properties of the gases are given in Annex A.
The requirements of this document cannot cover all details of design and construction because of the variety of sizes and configurations that may be employed. Where complete requirements for a specific design are not provided, the intention is for the designer, subject to approval of the purchaser's authorized representative and of the regulatory body, to provide design and details that are as safe as those laid out in this document.
EN 14620 consists of multiple parts.  This document specifies general requirements for the tank system concept, selection and general design considerations.
In case of a conflict between general requirements of this document and the requirements in other parts of EN 14620 related to a specific liquefied gas, the product-specific requirements set forth in the other parts prevail.

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 15213-3:2024(Main)
Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 3: Detection of Clostridium perfringens (ISO/TS 15213-3:2024)
kSIST-TS FprCEN ISO/TS 15213-3:2023

This document specifies the detection of Clostridium (C.) perfringens.
This document is applicable to:
—     products intended for human consumption;
—     products intended for animal feeding;
—     environmental samples in the area of food and feed production and handling;
—     samples from the primary production stage.
This horizontal method was originally developed for the examination of all samples belonging to the food chain. Based on the information available at the time of publication of this document, this method is considered to be fully suited to the examination of all samples belonging to the food chain. However, because of the large variety of products in the food chain, it is possible that this horizontal method is not appropriate in every detail for all products. Nevertheless, it is expected that the required modifications are minimized so that they do not result in a significant deviation from this horizontal method.
NOTE          Interlaboratory studies with a small number of participating laboratories (<10) were conducted for the following food categories:
—      ready-to-eat, ready-to-reheat meat products;
—      eggs and egg products (derivates);
—      ready-to-eat, ready-to-reheat fishery products;
—      processed fruits and vegetables;
—      infant formula and infant cereals (with probiotics);
—      multi-component foods or meal components.
It has also been validated with a small number of participating laboratories for the following other category:
—      environmental samples (food or feed production).
Since the method is not commonly used for samples in the primary production stage, this category was not included in the interlaboratory study. Therefore, no performance characteristics were obtained for this category. The method has not been validated for the category ‘pet food and animal feed’, as the test samples used for the interlaboratory study were already naturally contaminated with C. perfringens. Given the limited number of participating laboratories in the interlaboratory studies, the calculated performance characteristics can be used as indicative values of the method performance. For detailed information on the validation, see Clause 11 and Annexes C to F.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18563-3:2024(Main)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems (ISO 18563-3:2024)
SIST EN ISO 18563-3:2024

This document addresses ultrasonic test systems implementing array probes, for contact technique (with or without wedge) or for immersion technique, with centre frequencies in the range of 0,5 MHz to 10 MHz.
This document provides methods and acceptance criteria for determining the compliance of the complete system (see 3.2). Its purpose is for the verification of the correct operation of the system prior to testing or verification of the absence of degradation of the system.
The methods are not intended to prove the suitability of the system for particular applications but are intended to prove the capability of the complete system (used for an application) to operate correctly according to the settings used. Tests can be performed on individual ultrasonic beams (for phased array technique, see 9.4.4) or on resulting images (for phased array technique and total focusing technique, see 9.4.3).
The tests can be limited to the functions that are intended to be used for a certain application.
This document does not cover the sensitivity setting of the system for a specific application. Nor does it apply to the characterization or verification of the mechanical scanning equipment. It is intended that these items will be covered by the test procedure.
This document does not address the phased array technique using tandem technique.
The characterization of beams, as recommended in case of dead elements or for more in-depth knowledge of the beams, is presented in Annex A. It is not applicable for signal processing technology using arrays.
NOTE            Unless stated otherwise, in this document ‘TFM’ and ‘TFM technique’ refer to the total focusing technique as defined in ISO 23243, and to related techniques, see for example ISO 23865 and ISO 23234.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10882-2:2024(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2024)
oSIST prEN ISO 10882-2:2023

This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in
welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove
metals:
(111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/
(114) Self-shielded tubular-cored arc welding
(131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/
(135) Metal active gas welding; MAG welding; gas metal arc welding /USA/
(136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/
(137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/
(141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/
(15) Plasma arc welding;
(31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/
(52) Laser beam welding;
(912) Flame brazing; torch brazing /USA/
(97) Braze welding;
_ arc and flame gouging;
_ arc and laser cutting processes;
_ flame, plasma and laser and plasma cutting processes;
_ metal-spraying (see EN ISO 4063).
The following gases and vapours which can be produced or be present during welding and allied processes are
covered:
_ ozone (O3);
_ carbon monoxide (CO);
_ carbon dioxide (CO2);
_ nitric oxide (NO) and nitrogen dioxide (NO2);
_ vapours produced in the welding or cutting of metals having paint or other surface coatings.
Fuel, oxidant and shielding gases used in welding and allied processes are not covered.
The general background level of gases and vapours in the workplace atmosphere influences personal exposure,
and therefore the role of fixed point measurements is also considered.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23766:2024(Main)
Thermal insulating products for industrial installations - Determination of the coefficient of linear thermal expansion at sub-ambient temperatures (ISO 23766:2022)
SIST EN ISO 23766:2024

This document specifies the equipment and procedures for determining the coefficient of linear thermal expansion at sub-ambient temperatures (−196 °C to 25 °C), subject to the possible temperature limitation of the test specimens. It is not applicable to products which experience dimensional changes during the test due to the loss of hydration water or which undergo other phase changes.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23611-2:2024(Main)
Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2024)
kSIST FprEN ISO 23611-2:2024

This document specifies a method for sampling, extracting and preserving collembolans and mites from field soils as a prerequisite for using these animals as bio-indicators (e.g. to assess the quality of a soil as a habitat for organisms).
The sampling and extraction methods of this document are applicable to almost all types of soils. Exceptions can be soils from extreme climatic conditions (hard, frozen or flooded soils) and other matrices than soil, e.g. tree trunks, plants or lichens.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day