Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings

This document is applicable for thermal sprayed coatings. It contains basic recommendations for the design of components, which have to be completely or partially coated. The recommendations are applicable for new manufacturing as well as for repair of worn components. The coating can be of metallic, metal-ceramic, oxide-ceramic materials or polymers.

Thermisches Spritzen - Empfehlungen zum konstruktiven Gestalten von Bauteilen mit thermisch gespritzten Schichten

Dieses Dokument ist für thermische Spritzschichten anwendbar. Es enthält grundsätzliche Empfehlungen zur Gestaltung von Bauteilen, die komplett oder teilweise beschichtet werden müssen. Die Empfehlungen sind sowohl bei der Neufertigung als auch bei der Instandsetzung von verschlissenen Bauteilen anwendbar. Die Beschichtung kann aus metallischen, metallkeramischen, oxidkeramischen Werkstoffen oder aus Kunststoff bestehen.

Projection thermique - Recommandations relatives à la conception des éléments de construction comportant un revêtement déposé par projection thermique

Le présent document s’applique aux revêtements déposés par projection thermique. Il comprend des recommandations générales sur la conception des éléments qui doivent être revêtus, que ce soit en totalité ou en partie. Ces recommandations s’appliquent à la fabrication d’éléments neufs mais aussi à la réparation d’éléments usés. Le revêtement peut être en métal, en cermet, en oxyde-céramique ou en polymères.

Vroče brizganje - Priporočila za konstrukcijsko oblikovanje komponent s prevlekami, nanesenimi z vročim brizganjem

General Information

Status
Not Published
Publication Date
10-Jul-2024
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
16-May-2024
Due Date
03-Jul-2023
Completion Date
16-May-2024

Relations

Buy Standard

Draft
prEN 15520:2023
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15520:2023
01-marec-2023
Nadomešča:
SIST EN 15520:2007
Vroče brizganje - Priporočila za konstrukcijsko oblikovanje komponent s
prevlekami, nanesenimi z vročim brizganjem
Thermal spraying - Recommendations for constructional design of components with
thermally sprayed coatings
Thermisches Spritzen - Empfehlungen zum konstruktiven Gestalten von Bauteilen mit
thermisch gespritzten Schichten
Projection thermique - Recommandations relatives à la conception des éléments de
construction comportant un revêtement déposé par projection thermique
Ta slovenski standard je istoveten z: prEN 15520
ICS:
25.220.20 Površinska obdelava Surface treatment
oSIST prEN 15520:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15520:2023

---------------------- Page: 2 ----------------------
oSIST prEN 15520:2023


DRAFT
EUROPEAN STANDARD
prEN 15520
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2023
ICS Will supersede EN 15520:2007
English Version

Thermal spraying - Recommendations for constructional
design of components with thermally sprayed coatings
Projection thermique - Recommandations relatives à la Thermisches Spritzen - Empfehlungen zum
conception des éléments de construction comportant konstruktiven Gestalten von Bauteilen mit thermisch
un revêtement déposé par projection thermique gespritzten Schichten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 240.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15520:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15520:2023
prEN 15520:2023(E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Applications and specific properties of thermally sprayed coatings . 5
5 Basic rules for design of components with thermal sprayed coatings . 6
6 Design for preparation of components and work pieces for thermal spraying . 7
7 Machining and post-treatment of thermal sprayed coatings . 8
8 Instructions for design - Symbolic representation of the sprayed coating on drawings
- Test instructions in the parts list . 8
9 Examples for design suitable for spraying . 8
9.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.