iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62819:2023/AC:2024-03

(Corrigendum)

Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

Arbeiten unter Spannung - Augen-, Gesichts- und Kopfschutz gegen die Auswirkungen eines Störlichtbogens - Anforderungen und Testmethoden

Travaux sous tension - Protecteurs des yeux, du visage et de la tête contre les effets de l'arc électrique - Exigences de performances et méthodes d'essai

Delo pod napetostjo - Ščitniki oči, obraza in glave pred učinki električnega obloka - Zahtevane lastnosti in preskusne metode (IEC 62819:2022/COR1:2024)

General Information

Status
Published
Publication Date
21-Mar-2024
ICS
13.260 - Protection against electric shock. Live working
29.240.99 - Other equipment related to power transmission and distribution networks
29.260.99 - Other electrical equipment for working in special conditions
Technical Committee
CLC/TC 78 - Equipment and tools for live working
Current Stage
6060 - Document made available - Publishing
Start Date
22-Mar-2024
Completion Date
22-Mar-2024
Ref Project
SIST EN IEC 62819:2023/AC:2024 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods (IEC 62819:2022/COR1:2024)

Relations

Corrects
EN IEC 62819:2023 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
Effective Date
19-Mar-2024

Buy Standard

EN IEC 62819:2023/AC:2024EN IEC 62819:2023/AC:2024
PreviousNext
Corrigendum
EN IEC 62819:2023/AC:2024
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62819:2023/AC:2024
01-junij-2024
Delo pod napetostjo - Ščitniki oči, obraza in glave pred učinki električnega obloka
- Zahtevane lastnosti in preskusne metode (IEC 62819:2022/COR1:2024)
Live working - Eye, face and head protectors against the effects of electric arc -
Performance requirements and test methods (IEC 62819:2022/COR1:2024)
Arbeiten unter Spannung - Augen-, Gesichts- und Kopfschutz gegen die Auswirkungen
eines Störlichtbogens - Anforderungen und Testmethoden (IEC 62819:2022/COR1:2024)
Travaux sous tension - Protecteurs des yeux, du visage et de la tête contre les effets de
l'arc électrique - Exigences de performances et méthodes d'essai (IEC
62819:2022/COR1:2024)
Ta slovenski standard je istoveten z: EN IEC 62819:2023/AC:2024-03
ICS:
13.260 Varstvo pred električnim Protection against electric
udarom. Delo pod napetostjo shock. Live working
13.340.20 Varovalna oprema za glavo Head protective equipment
29.260.99 Druga električna oprema za Other electrical equipment for
delo v posebnih razmerah working in special conditions
SIST EN IEC 62819:2023/AC:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62819:2023/AC:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 62819:2023/AC:2024


EUROPEAN STANDARD EN IEC 62819:2023/AC:2024-
03
NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2024

ICS 13.260; 29.240.99; 29.260.99
English Version
Live working - Eye, face and head protectors against the effects
of electric arc - Performance requirements and test methods
(IEC 62819:2022/COR1:2024)
Travaux sous tension - Protecteurs des yeux, du visage et Arbeiten unter Spannung - Augen-, Gesichts- und
de la tête contre les effets de l'arc électrique - Exigences de Kopfschutz gegen die Auswirkungen eines Störlichtbogens
performances et méthodes d'essai - Anforderungen und Testmethoden
(IEC 62819:2022/COR1:2024) (IEC 62819:2022/COR1:2024)
This corrigendum becomes effective on 22 March 2024 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62819:2023(Main)
Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
SIST EN IEC 62819:2023

This document is applicable to eye, face and head protectors used in work where there is a risk of exposure to an electric arc hazard. Such protectors consist of one or several devices (e.g. hood, goggles, balaclavas, face shields, helmets, etc.), which might need to be combined together in order to give protection to eye, face and head for the intended use. This document covers the performance requirements for protectors and single protective devices considering thermal, optical and mechanical hazards of an electric arc. Because of the limitations of test apparatus at very high energy arcs, no arc rating above 4 100 kJ/m2 (100 cal/cm2) can be assigned to protectors. This document does not cover protection against electric shock, noise, the consequences of physical and mental shock and the toxic influences caused by an electric arc. This document does not cover protectors for work intentionally using an electric arc, e.g. arc welding, plasma torch. This document does not cover face-screens for the reduction of an electric field inside conductive clothing in accordance with IEC 60895. Any other claims of the manufacturer for protection against other hazards to eye or face (e.g. welding radiation, hazards occurring during fire-fighting) are outside the scope of the document. Products designed and manufactured in accordance with this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61243-1:2021(Main)
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC
SIST EN IEC 61243-1:2021

IEC 61243-1:2021 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies of 50 Hz and/or 60 Hz. This document applies only to voltage detectors of capacitive type used in contact with the bare part to be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this document (see 4.4.2.1 for general design). Other types of voltage detectors are not covered by this document. Self ranging voltage detectors (formally "multi range voltage detectors") are not covered by this document. Some restrictions or formal interdictions on their use are applicable in case of switchgear of IEC 62271 series design, due to insulation coordination, on overhead line systems of electrified railways (see Annex B) and systems without neutral reference. For systems without neutral reference, the insulating level is adapted to the maximum possible voltage to the earth (ground). Products designed and manufactured according to this document contribute to the safety of users provided they are used by persons trained for the work, in accordance with the hot stick working method and the instructions for use. Except where otherwise specified, all the voltages defined in this document refer to values of phase-to-phase voltages of three-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth (ground) voltages are used to determine the operating voltage. This third edition cancels and replaces the second edition published in 2003 and Amend-ment 1:2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The scope is more precise, stating that only bare contact to the part to be tested is reliable for these contact voltage detectors. The rationale is that tests on painted or coated conductors have led to wrong indications, as this non-conductive paint or coat acts as a capacitor with different capacity according to the thickness. This capacity has an effect on the threshold voltage. b) A contact probe is introduced as a new type of non-conductive contact electrode. c) A new type "exclusively outdoor type" has been defined and implemented into the requirements and test procedure. d) A selector for voltage and frequency is allowed if foreseeable misuse is excluded. e) The marking for voltage detectors with low interference voltage has been made more precise. f) The indication groups have been made more precise and requirements and tests for the "ready to operate state" and "stand-by state" added. g) Requirements and tests for electromagnetic compatability have been implemented. h) An example for good electrical connection for the tests is introduced.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61472-2:2021(Main)
Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV
SIST EN IEC 61472-2:2021

IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials. The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:  
workers are trained for, and skilled in, working live lines or close to live conductors or equipment;
the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;
transient overvoltages are the determining overvoltages;
tool insulation has no continuous film of moisture present on the surface;
no lightning is observed within 10 km of the work site;
allowance is made for the effect of the conducting components of tools.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62237:2005(Main)
Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
SIST EN 62237:2007

Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at different potentials. They are not considered as a fixed component of a live working device (e.g. aerial device). They can be connected and disconnected under negligible pressure. They can be directly handled by the user.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62819:2023(Main)
Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
SIST EN IEC 62819:2023

This document is applicable to eye, face and head protectors used in work where there is a risk of exposure to an electric arc hazard. Such protectors consist of one or several devices (e.g. hood, goggles, balaclavas, face shields, helmets, etc.), which might need to be combined together in order to give protection to eye, face and head for the intended use. This document covers the performance requirements for protectors and single protective devices considering thermal, optical and mechanical hazards of an electric arc. Because of the limitations of test apparatus at very high energy arcs, no arc rating above 4 100 kJ/m2 (100 cal/cm2) can be assigned to protectors. This document does not cover protection against electric shock, noise, the consequences of physical and mental shock and the toxic influences caused by an electric arc. This document does not cover protectors for work intentionally using an electric arc, e.g. arc welding, plasma torch. This document does not cover face-screens for the reduction of an electric field inside conductive clothing in accordance with IEC 60895. Any other claims of the manufacturer for protection against other hazards to eye or face (e.g. welding radiation, hazards occurring during fire-fighting) are outside the scope of the document. Products designed and manufactured in accordance with this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61243-1:2021(Main)
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC
SIST EN IEC 61243-1:2021

IEC 61243-1:2021 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies of 50 Hz and/or 60 Hz. This document applies only to voltage detectors of capacitive type used in contact with the bare part to be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this document (see 4.4.2.1 for general design). Other types of voltage detectors are not covered by this document. Self ranging voltage detectors (formally "multi range voltage detectors") are not covered by this document. Some restrictions or formal interdictions on their use are applicable in case of switchgear of IEC 62271 series design, due to insulation coordination, on overhead line systems of electrified railways (see Annex B) and systems without neutral reference. For systems without neutral reference, the insulating level is adapted to the maximum possible voltage to the earth (ground). Products designed and manufactured according to this document contribute to the safety of users provided they are used by persons trained for the work, in accordance with the hot stick working method and the instructions for use. Except where otherwise specified, all the voltages defined in this document refer to values of phase-to-phase voltages of three-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth (ground) voltages are used to determine the operating voltage. This third edition cancels and replaces the second edition published in 2003 and Amend-ment 1:2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The scope is more precise, stating that only bare contact to the part to be tested is reliable for these contact voltage detectors. The rationale is that tests on painted or coated conductors have led to wrong indications, as this non-conductive paint or coat acts as a capacitor with different capacity according to the thickness. This capacity has an effect on the threshold voltage. b) A contact probe is introduced as a new type of non-conductive contact electrode. c) A new type "exclusively outdoor type" has been defined and implemented into the requirements and test procedure. d) A selector for voltage and frequency is allowed if foreseeable misuse is excluded. e) The marking for voltage detectors with low interference voltage has been made more precise. f) The indication groups have been made more precise and requirements and tests for the "ready to operate state" and "stand-by state" added. g) Requirements and tests for electromagnetic compatability have been implemented. h) An example for good electrical connection for the tests is introduced.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61472-2:2021(Main)
Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV
SIST EN IEC 61472-2:2021

IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials. The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:  
workers are trained for, and skilled in, working live lines or close to live conductors or equipment;
the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;
transient overvoltages are the determining overvoltages;
tool insulation has no continuous film of moisture present on the surface;
no lightning is observed within 10 km of the work site;
allowance is made for the effect of the conducting components of tools.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62237:2005(Main)
Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
SIST EN 62237:2007

Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at different potentials. They are not considered as a fixed component of a live working device (e.g. aerial device). They can be connected and disconnected under negligible pressure. They can be directly handled by the user.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-4-1:2024(Main)
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
SIST EN IEC 60966-4-1:2024

IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-2-1:2024(Main)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
SIST EN IEC 60034-2-1:2024

IEC 60034-2-1:2024 is available as IEC 60034-2-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-2-1:2024 is intended to establish methods of determining efficiencies from tests, and also to specify methods of obtaining specific losses. This document applies to DC machines and to AC synchronous and induction machines of all sizes within the scope of IEC 60034-1 rated for mains operation. These methods may be applied to other types of machines such as rotary converters, AC commutator motors and single-phase induction motors. This third edition cancels and replaces the second edition of IEC 60034-2-1 published in 2014. This edition includes the following significant technical changes with respect to the previous edition: - Harmonization of layout and requirements with IEC 60034-2-2 and IEC 60034-2-3.

  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day