SIST EN IEC 61169-10:2024
(Main)Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 Ω (Type SMB) (IEC 61169-10:2024)
Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 Ω (Type SMB) (IEC 61169-10:2024)
IEC 61169-10:2024, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series SMB RF coaxial connectors with snap-on coupling with a characteristic impedance of 50 Ω.
This document prescribes mating face dimensions for high performance connectors – grade 2, dimensional details of standard test connectors − grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series SMB RF connectors.
This document indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
The series SMB connectors are used to connect with all kinds of RF cables and microstrips in microwave transmission systems. The operating frequency is up to 4 GHz.
Hochfrequenz-Steckverbinder – Teil 10: Hochfrequenz-Koaxialsteckverbinder mit einem Innen-/Außenleiterdurchmesser von 3 mm (0,12 Zoll) mit Schnappkupplung - Wellenwiderstand 50 Ohm (Typ SMB) (IEC 61169-10:2024)
Connecteurs pour fréquences radioélectriques. Dixième partie: Connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 3 mm (0,12 in) à accouplement par encliquetage - Impédance caractéristique 50 ohms (type SMB) (IEC 61169-10:2024)
l’IEC 61169-10:2024, qui est une spécification générique (SS - sectional specification), fournit les informations et règles applicables en vue de l'établissement de spécifications particulières (DS - detail specification) pour les connecteurs coaxiaux pour fréquences radioélectriques série SMB à couplage par encliquetage avec une impédance caractéristique de 50 Ω.
Le présent document prescrit les dimensions de la face d'accouplement pour les connecteurs à haute performance de grade 2, les détails dimensionnels des connecteurs d'essai normalisés de grade 0 ainsi que des informations concernant les calibres et les essais tirés de l’IEC 61169‑1, applicables à toutes les spécifications particulières relatives aux connecteurs pour fréquences radioélectriques de série SMB.
Le présent document indique les caractéristiques de performance recommandées à prendre en considération lors de la rédaction d'une spécification particulière et il couvre les des programmes d'essai et les exigences de contrôle à l'égard des niveaux d’assurance de la qualité M et H.
Les connecteurs de série SMB sont utilisés avec tout type de câbles pour fréquences radioélectriques et de microrubans dans les systèmes de transmission à hyperfréquences. La fréquence de fonctionnement va jusqu'à 4 GHz.
Radiofrekvenčni konektorji - 10. del: Področna specifikacija za radiofrekvenčne (RF) koaksialne konektorje z notranjim premerom zunanjega vodnika 3 mm (0.12 in) in navojnim spajanjem - Karakteristična impedanca 50 ohmov (tip SMB) (IEC 61169-10:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61169-10:2024
01-junij-2024
Radiofrekvenčni konektorji - 10. del: Področna specifikacija za radiofrekvenčne
(RF) koaksialne konektorje z notranjim premerom zunanjega vodnika 3 mm (0.12
in) in navojnim spajanjem - Karakteristična impedanca 50 ohmov (tip SMB) (IEC
61169-10:2024)
Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors
with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling -
Characteristic impedance 50 Ω (Type SMB) (IEC 61169-10:2024)
Hochfrequenz-Steckverbinder – Teil 10: Hochfrequenz-Koaxialsteckverbinder mit einem
Innen-/Außenleiterdurchmesser von 3 mm (0,12 Zoll) mit Schnappkupplung -
Wellenwiderstand 50 Ohm (Typ SMB) (IEC 61169-10:2024)
Connecteurs pour fréquences radioélectriques. Dixième partie: Connecteurs coaxiaux
pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 3
mm (0,12 in) à accouplement par encliquetage - Impédance caractéristique 50 ohms
(type SMB) (IEC 61169-10:2024)
Ta slovenski standard je istoveten z: EN IEC 61169-10:2024
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 61169-10:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61169-10:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61169-10:2024
EUROPEAN STANDARD EN IEC 61169-10
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2024
ICS 33.120.30
English Version
Radio-frequency connectors - Part 10: Sectional specification for
RF coaxial connectors with inner diameter of outer conductor 3
mm (0,12 in) with snap-on coupling - Characteristic impedance
50 Ω (Type SMB)
(IEC 61169-10:2024)
Connecteurs pour fréquences radioélectriques - Partie 10: Hochfrequenz-Steckverbinder - Teil 10: Hochfrequenz-
Spécification intermédiaire relative aux connecteurs Koaxialsteckverbinder mit einem Innen-
coaxiaux pour fréquences radioélectriques avec diamètre /Außenleiterdurchmesser von 3 mm (0,12 Zoll) mit
intérieur du conducteur extérieur de 3 mm (0,12 in) à Schnappkupplung - Wellenwiderstand 50 Ohm (Typ SMB)
couplage par encliquetage - Impédance caractéristique (IEC 61169-10:2024)
50 Ω (type SMB)
(IEC 61169-10:2024)
This European Standard was approved by CENELEC on 2024-03-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61169-10:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61169-10:2024
EN IEC 61169-10:2024 (E)
European foreword
The text of document 46F/658/FDIS, future edition 1 of IEC 61169-10, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-10:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete
...
SLOVENSKI STANDARD
oSIST prEN IEC 61169-10:2023
01-marec-2023
Radiofrekvenčni konektorji - 10. del: Radiofrekvenčni (RF) koaksialni konektorji z
notranjim premerom zunanjega vodnika 3 mm (0.12 in) in navojnim spajanjem -
Karakteristična impedanca 50 ohm (tip SMB)
Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of
outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50
ohms (Type SMB)
Connecteurs pour fréquences radioélectriques. Dixième partie: Connecteurs coaxiaux
pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 3
mm (0,12 in) à accouplement par encliquetage - Impédance caractéristique 50 ohms
(type SMB)
Ta slovenski standard je istoveten z: prEN IEC 61169-10
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
oSIST prEN IEC 61169-10:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61169-10:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61169-10:2023
46F/634/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61169-10 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-30 2023-03-24
SUPERSEDES DOCUMENTS:
46F/604/CD, 46F/619/CC
IEC SC 46F : RF AND MICROWAVE PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
United States of America Mr John Morelli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3
mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
please see CDV from Chinese NC
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61169-10:2023
IEC CDV 61169-10 © IEC 2022 2 46F/634/CDV
1 CONTENTS
2
3 1 Scope .4
4 2 Normative references .4
5 3 Mating face and gauge information .4
6 3.1 General connectors – Grade 2 .4
7 3.1.1 Connector with pin centre contact .4
8 3.1.2 Connector with socket centre contact .6
9 3.2 Gauges .7
10 3.2.1 Gauge pin for socket centre contact .7
11 3.2.2 Gauge for outer contact of connector with pin centre contact .7
12 3.3 Dimensions – Standard test connectors – Grade 0 .8
13 3.3.1 Connectors with pin centre contact.8
14 3.3.2 Connector with socket centre contact .9
15 4 Quality assessment procedures . 11
16 4.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.